Items for sale

I have decided to open a sale page with Meccano compatibles, as I was not satisfied about certain second hand lots. All brass parts are based on original drawings, brandnew, unused and produced on a CNC machine. All 3D printed parts are being printed on a Cubicon Style printer.

The price is in € excluding 21% VAT and excluding transport. If you want to order parts contact us at [email protected]

Picture Item number Item description Price per item
pic 59 collar, 2 holes, brass 0,65
pic 59a aero collar, 2 holes, brass 0,85
pic 63 coupling, 3 holes, brass 2,75
pic 63c threaded coupling, brass 3,25
pic 63d short coupling, 2 holes, brass 2,50
pic 64 threaded boss, brass 1,75
pic 179 rod socket, brass 2,76
pic MK-10 Spiral gear set, brass, ratio 1:4. As used in the Heidelberg Printing Press. The large gear has 56 teeth, the small one has 14 teeth. Only 3 sets left 80

The following section offers 3D printed parts based on the Meccano system. The metal parts as shown in the picture are just for demonstration only and are not part of the sale. Special wishes? show me a drawing and I will give a price.

Picture Item number Item description Price per item in €
pic MK-1 Black nylon roller bearing carrier to fit a single 4-10-4 roller bearing. 2 holes at 1” distance 2
pic MK-2 Black nylon roller bearing carrier to fit two 4-10-4 roller bearings. 3 holes 2,30

The following section offers specials regarding models I have created in the past.

Picture Item number Item description Price per item in €
pic MP 182 The code to operate the steppermotors including the Arduino Mini. The code is already stored on the Arduino Mini, so it’s just plug and play. 15
pic Cube solver This basic kit contains parts so that you are able to create your own Rubik Cube Solver. For an overview have a look at the special page 500
pic Cube solver PCB board only. This board can accommodate up to 7 DRV 8825 drivers or similar and a Arduino Teensy or similar board for any application. 15
pic Cube solver extension 1 to the basic kit containing 3 pairs of 76t gears and double start worms, 6 gears in total 82
pic NEMA 14-20 NEMA 14 steppermotor with 4mm round shaft, customised to fit Meccano pulleys, gears etc. Specifications see here. 24
pic NEMA 14-66 NEMA 14 steppermotor with 4mm round shaft, customised to fit Meccano pulleys, gears etc. Specifications see here. 28
pic MK-16 set of ABS camwheels (11 in total) to build the Heidelberg Printing Press pm